Planer and Sander NTBSG130KR/KRP

Wide Belt Sander

Add Product for Request

This machine is mainly used for solid wood board, panel, finger joined panel, door, flooring etc, with advanced technology, high precision, reasonable structure and easy operation

  • With super large helical cutter can work stable
  • NTBSG130KRP: First unit is planer tool, second sanding unit is steel roller, third unit is sanding pad
  • NTBSG130KR: First unit is planer tool, second sanding unit is steel roller
  • With anti- rebounding device in the front of planer to protect operator
  • Wooden dusts is cleaned by the brusher
  • Machine will not start when air pressure is not enough
  • Adopt pressure shoes to avoid damaging the head of panel during sanding
  • Cut off a big quantity with lower noisy and fine surface
  • Planer and each sanding unit can switch on/ off separately

ModelNTBSG130KRPNTBSG130KR
Width of sanded panel40 - 1300 mm40 - 1300 mm
Thickness of sanded panel3 - 120 mm3 - 120 mm
Speed of planning roller30 m/s30 m/s
Speed of abrasive belt on 2nd unit18 m/s18 m/s
Speed of abrasive belt on 3rd unit12 m/s——
Feeding speed6 - 30 m/min6 - 30 m/min
Size of abrasive belt1330 x 2500 mm1330 x 2500 mm
Diameter of planerΦ180 mmΦ180 mm
Power of planning roller22 kW22 kW
Power of abrasive belt on 2nd unit22 kW22 kW
Power of abrasive belt on 3rd unit15 kW——
Conveyor motor power4 kW4 kW
Lifting motor power0.25 kW0.25 kW
Brush motor power0.37 kW0.37 kW
Working pressure0.55 Mpa0.55 Mpa
Compressed air consumption0.2 m³/h0.2 m³/h
Pressure relief device required> 13000 m³/h> 13000 m³/h
Speed required for cleaning equipment25 - 30 m/s25 - 30 m/s
Dimensions (L x Wx H)3000 x 2090 x 2300mm2500 x 1850 x 2180 mm
Net weight6500 kg3500 kg
Voltage380V/3P/50Hz380V/3P/50Hz
NTBSG130KR KRP-B2

Oil/air filters supply purity air continually

NTBSG130KR KRP-B3

Planer and each sanding unit can switch on/off separately

NTBSG130KR KRP-B4

Control panel shows the panel thickness and controls the sanding unit separately

NTBSG130KR KRP-B5

Control panel shows the panel thickness and controls the sanding unit separately

NTBSG130KR KRP-B6

Limited switch to protect the sandpaper off- center

NTBSG130KR KRP-B7

Pressure adjusting device adjusts tension of sanding belt to avoid belt damage due to air fluctuate

NTBSG130KR KRP-B8

Electrical components are steady and durable in working

NTBSG130KR KRP-B9

Brush roller cleaning the panel after sanding

NTBSG130KR KRP-B10

Press rollers avoid slipping of working piece

NTBSG130KR KRP-B11

Suitable sample: block board, Bamboo block board

NTBSG130KR KRP-B12
NTBSG130KR KRP-B13