Solid Wood Frame Edge Milling Machine NTSWFEMM
Solid Wood Frame Edge Milling Line
Add Product for RequestFunction
- It is used for solid wood cross-bending, vertical boring, door core plate milling, drilling and so on
- Double-spindle positive and negative milling, smooth wood grain processing, no chipping, smooth and smooth surface
- The built-in parameterization module of the system makes the man-machine operation simple and fast, reducing the requirements for technical profession
Characteristic
Solid wood assembly doors, solid wood cabinet doors, solid wood wardrobe doors, solid wood frame cabinets, solid wood siding panels, etc.
Technical details
| Model | NTSWFEMM |
| Max. processing length | 2500 mm |
| Max. processing thickness | 50 mm |
| Max. milling depth | 100 mm |
| Power of spindle | 9 kW x 2; 6 KW x 1 |
| Max. speed of spindle | 12000 rpm |
| Milling cutter inner diameter | 35 mm |
| Milling cutter max. outside diameter | 180 mm |
| Machine size (L x W x H) | 4700 x 1700 x 1560 mm |
| Weight of machine | 3200 kg |
Delta Control System: Customized system operation interface, easy to learn and use;
Built-in a variety of process curves to meet the parametric processing of most solid wood assembly doors, cabinet doors, wardrobe doors.
The important electrical components in the control cabinet are all Siemens electrical equipment; the main circuit is equipped with a filter to eliminate interference and ensure the stability of the control system.
Special spindle for solid wood processing, high efficiency, low temperature rise, low noise and long life. Easily handle end milling, horse end milling, and core milling.
Delta servos with Xinbao reducer, large torque, to ensure the processing speed and stability of the equipment.
The Z-axis uses a brake motor that protects the machine head from slipping off after a power failure.
X-axis PMI 35 square rail: large size, large contact surface, strong load carrying capacity. All the large milling machines on the rail mounting surface are flattened, CNC punched, and the installation precision is high.
X-axis diameter 40mm TBI screw, no deformation for long distances, ensuring fine transmission.
The new type of drag chain is divided into four compartments to separate the signal lines and power lines according to the specifications, so as to better prevent signal interference, and also eliminate the screwing work during the cable working process.
The cable is made of high-elastic shielding wire for a longer service life.
Bed: welded with square steel, tempered, eliminate welding stress, and ensure no deformation after many years of use. The bed reinforcement is denser, which increases the strength of the bed and ensures that the bottom plate is not deformed.
The bed must be subjected to vibration aging and tempering, and the milling surface of the large CNC machining center.
The steel rails are welded on the mounting surface of the rails. When the rails are installed, the bolting depth is increased, the load carrying capacity is increased, and the rigidity of the equipment is ensured.