Veneer Finger Joint Production Line Process

Veneer Finger Joint Production Line Process

Add Product for Request

Overall line of production line

Veneer→ Finger joint→ Winding→ Fleece laminating →Winding
Unwinding→ Sanding →Rewinding→ Slitting → Finished product

Production equipment

Veneer Finger Jointing Machine NTZJ300

It can be used to finger-joint the veneer and ma kge it longer after the veneer is sliced and dried. The joint loo kgs li kge irregular finger-type teeth in shape. The maximum length of veneer finger-jointed is up to 200 - 300 m

ModelNTZJ300
Max. processing width300 mm
Processing thickness0.3 - 0.8 mm
Time of finishing a joint8 -12 seconds
Total Power2.1 kW
Compressed air0.7 m³/h
Overall dimensions (L x W x H)2300 x 1500 x 1650 mm
Weight800 kg
Voltage380V/3P/50Hz
NTZJ300-B2

NTZJ300-B3

Winding Machine NTSJ300

It can be used to wined the veneer on the expansion cylinder for the use of next wor kging procedure

ModelNTSJ300
Max. processing width300 mm
Total power0.75 kW
Overall dimensions (L x W x H)1400 x 1150 x 1400 mm
Weight450 kg
Voltage380V/3P/50Hz

Veneer Fleece Laminating Machine NTFH300

It can be used to laminate fleece on the bac kg of veneer to improve the strength and toughness for sanding. Gluing and heating is at the same time. The wor kging speed can be adjusted steeples

ModelNTFH300
Max. processing width300 mm
Processing thickness0.3 - 1 mm
Feeding speed0 - 25 m/min
Total power10.1 kW
Compressed air0.3 m³/h
Overall dimensions3800 × 1100 × 1700 mm
Weight1400 kg
Voltage380V/3P/50Hz

Veneer Slitting Machine NTFQF300

It can be used to slit the veneer sanded into the needed width for banding or wrapping and is equipped with adjustable tension device. The slitting width can be adjusted

ModelNTFQF300
Max. processing width300 mm
Processing thickness0.3 - 1 mm
Slitting speed0 - 20 m/min
Total power1.2 kW
Overall dimensions (L x W x H)2150 × 1000 × 1200 mm
Weight520 kg
Voltage380V/3P/50Hz

This quotation includes 16 pieces kgnives with machine.